
This simple but safe and effective switcher
allows the connection of up to ten speakers to any stereo, even those
without built-in speaker switching ability. Just one pair, all five
pairs or any other switch combination can be chosen. Power rating
(per channel) is 50 watts, so small and moderate power amplifiers are safe to
connect. Assuming 8Ω speakers
and dependent on the selection chosen, the connected stereo will see a
load never lower than 4Ω or higher than 16Ω. This model provides overload
cutoff protection against shorts; nonetheless never make or
change
speaker wiring connections while your stereo is on!
$39.50 plus shipping
(see below)
|

- passive
device, no power
required
- series/parallel matrix
switching provides a safe 4-16Ω
load range
- 60
day defective exchange warranty:
CE certified
- output short protection: 1/4"
stereo headphone jack output
- power rating 50
watts RMS
per channel
- dimensions: length
205mm, width 112mm, height 43mm
|